Форум по автобезопасности -
автосигнализации

Hi guys,

First of all, I'm sorry for writing this in English but I don't speak Russian.

I'm the owner of an Audi A5 2.0 TFSI 2013, petrol engine, no volume sensors, push to start key, automatic.
Recently I bought an Pandora alarm - DXL 1840L, RMD-5M relay, DI-02 and because there are no authorized installers in my area, I have decided to install the alarm myself.. How hard can it be?

In the following picture I'll show you what I have connected and what not.
Green means that the cable has been connected to what is supposed to be connected to.
Yellow means that I don't know if OR where that cable has to be connected.
I don't have an alarm so I cut the alarm from the picture, and because I have the RMD-5M relay, I used it instead of the standard relay that comes in the box.

Before start doing this installation, I have disconnected the battery and I still didn't connect it back because I want to be sure that I did everything right.
As you can see in the picture, I used 3 diodes on the yellow wire that goes to ignition lock.

Now, please help me, is there anything wrong with my wiring, what's missing?
I hope this thread will help others.
And I'm sorry if this has been discussed somewhere on this forum, but because I use google translate, I might have missed it.