Форум по автобезопасности -
автосигнализации

Сообщение от Mixxxa

J@hNnY

When CAN communication operation is detected, it switches to CAN communication status.
When a state of the following switches changes, it switches to CAN communication state:
Key switch
Hazard switch
Door lock/unlock switch
Front door switch (LH, RH)
Rear door switch (LH, RH)
Back door switch
Combination switch (passing, lighting switch 1st position, front fog lamp)
Keyfob (lock/unlock signal)
Door lock assembly LH (key cylinder switch)
When control performed only by BCM is required by switch, it shifts to CAN communication inactive
mode.
Status of combination switch reading function is changed.