Форум по автобезопасности -
автосигнализации

Hi, I have a fortin Evo-One installed on my Audi A6 C7, and I use my OEM fob to remote start the car, and is working fine. Until I bought last week a Pandora DX-4G to try and use the Pandora Connect app to remote start my car from internet but I did not want to use Pandoras devices for remote start the car, because I did not uand to sacrify a key to be all the time in the car. So I was thinking that there is a way to connect Evo-one like a bypass to pandora and to remote start the car from the phone.
My question is how can I connect DX-4G to Evo-one? Since I installed Pandorato my car (+,-,CAN1,CAN2), fortin is not working anymore.
Is there a setting that I did not configured corectly, or there needs some wires connections to be made.
Thank you.

Hi, try to use manual to config connection DX-4G to your car. Fortin is no need any more. just proper connect pandora system.
have a look link below:
http://loader.alarmtrade.ru/?_ga=2.1...127.1590616417

Добавлено через 1 минуту

Hi, try to use manual to config connection DX-4G to your car. Fortin is no need any more, just do proper connection with pandora system.
have a look link below:
http://loader.alarmtrade.ru/?_ga=2.1...127.1590616417

Thank you for your help, but I did check all the cables again, and I did a reboot to Fortin, and now I can remote start the car just like before, and I cand se in the app that the engine was started, and I did foud a esternal triger for fortin, but what is Pandora unit doing when I press the start engine button from the app? I do need a - (minus) impulse to fortin to start the engine...but I can not find a change when I press the start engine button.